IsoCal Data Logger program is part of the IsoCal software suite for conducting experiments using isothermal calorimeters, for logging of collected data, and for data analysis and report generation (the other component of this package is IsoCal Report Generator). The program supports automation of calorimeter calibration process. IsoCal Data Logger works with one or two Pico Instruments' TC08 data acquisition modules that interface to the computer over COM ports (USB interfaces can also be used in conjunction with USB-COM adapters). Logs are saved in Tab-delimited ASCII file format. IsoCal is compatible with TAM Air™ Calorimeters, offered by TA Instruments (formerly Thermometric AB), and will support up to two 8-channel units. The latest released version of the Data Logger is 5.4. It is compatible with IsoCal Report Generator 4.x.

Main program features:

• Independent configuration and logging of all channels - channels can be configured and activated without interrupting experiments running on other channels;
• "Smart" logging features saves data at fixed time intervals and also whenever any of the measured parameters changes by more than a user-defined threshold - this allows to log more points when signals change and less points when they stay constant;
• Data is saved in the units of power and energy as well as raw voltages (this requires that the calorimeter be calibrated using the calibration screen);
• Channel configuration fields are user-defined (defaults are suggested for cement applications);
• Data files from previous experiments can be loaded into the graph for comparison purposes;
• Charts and channel configuration info can be printed out;
• Ease of use - all instructions are right in program screens.

For more information, please contact Solidus Integration.

• Download IsoCal Data Logger v.5.4
• Download IsoCal Report Generator v.4.8

A screen shot of IsoCal main program window is shown below.

IsoCal Main Program Window